Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
This is a step by step guide to manufacturing a case for your Ipad 2 using 1/8" plywood and an industrial CO2 laser (in conjuction with Autodesk Inventer)

Materials:
- 12"x24" sheets of plywood (2)
- Industrial CO2 laser
- Computer with autodesk Inventor and corel (Interface with laser)
- 1/4" magnets (5)
- elmer's glue (for thje magnets)
- wood glue (to hold the case together)
- clamps (to hold peices together while te glue dries)
- Cardboard for prototyping (optional)

Step 1: Create Drawing Files

Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
Using Autodesk Inventor create the drawing files. Use the dimensions included in the pictures

Notes
-we used magnets as a latching machanism for the case
- make sure that the magnets are aligned
- also it is optional to include a magnate on the outer cover tat takes advantage of the i pad's locking mechanism, it will lock the ipad when you close the case

Step 2: Laser in cardboard (optional)

you can test to see if your sizes are correct by printing your project in cardboard.

Step 3: Cut final project

Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
-Take the .idw files and save a copy as .dxf
-Send these files to corell and position the drawings

Tips
-test different cutting powers to see which will cut your material the best
-use weights to hold down the wood so that the laser cuts evenly

Step 4: Sand final Project

Wooden IPad 2 case
use coarse grit sandpaper to remove burn marks from your project

Step 5: Glue parts

Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
Apply glue to the inside of joints and assemble the case. Use clamps to hold the parts together tightly while the glue dries.

Step 6: Enjoy

Wooden IPad 2 case
Wooden IPad 2 case
Wooden IPad 2 case
 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel