Wooden Arabian knife (Khanjar)

turn an old log to a beautiful inlaid Arabian Khanjar!

Step 1: Drawing your design, Choosing your wood

Wooden Arabian knife (Khanjar)
  • The first step is to choose or draw a design that you wish to make, here i chose to make an arabian knive or khanjar ???? with a handle inlaid with glass jewelery and an antique looking pin on the pommel.
  • i cut a wood log in half, with a height about 26 cm and 6.5 cm in diametre, the wood has seasoned alot on the balcony under full sun and rain so its a bit decomposed on the outer look.
  • the wood is from the tree Melia Azedarach, which really has a tough grain.

    Step 2: The main shape

    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
  • Using a handsaw and a BIG wooden hammer i made, i carved the rough shape of the Khanjar, i also used a small wide U chisel since the rough shape is already, small.
  • then i carve the main shape of the knive with a sharp razor.

    Step 3: Working with details

    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
  • With the razor, i start shaping the whole knife and rounding the corners of the handle and smoothing the wooden blade .
  • Continue removing wood from the blade to give it a sturdy shape, then with a hard sandpaper sand it till it has a straight surface on the sides of the wooden blade, you should also sand the top and bottom to give smooth round, at the bottom sand it diagonally to give it a cutting edge
  • i draw the handle shape on the handle and carve it with the razor,then draw circles where jewelry inlaying should be

    Step 4: Inlaying

    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
  • im really sorry since some steps wheren't captured during inlaying.. so i'm gonna explain by words.
  • after carving the main shape i choose the jewelry colors and sizes, then with a driller i make shallow holes where the jewelry should be placed, the holes of course match the size of the jewelry which is 4 mm for the small ones and 5mm for the purple ones, as for the pommel, i chose an antique looking pin which kinda looks like a turks or arab hat from above
  • before inlaying, i sand the whole knive with smooth sandpaper, then i sent the knive to laquer it, which gives it a nice glossy look, and preserve the wood better.
  • then i start putting wood vinyl or wood glue on the bottom of every peace then inlaying it in the handle with a nice push downwards (although some peaces are higher than others but who cares! that's my first try) and that took me a lot of patience, ALOT.

    Step 5: Complete!

    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)
    Wooden Arabian knife (Khanjar)

    16 hours of hard work from log to full handmade arabic khanjar

    hope you like it :D

  •  
     

    Tag cloud

    make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel