In this instructable I am going to introduce you to the CUT program. Follow along as we build a hotrod from start to finish. We had some celebrity help and many, many people who volunteer to bring this idea to life. The above picture is a photo shoot of the kids and intstructors cars and bikes.
Step 1: Pic a vehicle
First thing to do is pic a vehicle. We chose a forgotten relic 1947-1949 chevrolet pick up. Your vehicle choice should be whatever moves and inspires you. It does not matter make, model, price. If you love it, its the right one
Step 2: Choose suspension and driveline
So now we get into the nitty gritty. Driveline and chassis.
There are many choices we could have gone with.
stock with disc brake conversion
Mustang II ifs
and our choice is a chevrolet S10 rolling chassis
the reason we chose this platform is simple. The truck has IFS, disc brakes, same the wheelbase as our truck and the aftermarket is huge for parts pieces for this platform.
So now the suspension. We want it to sit low. Reallly low. So airbags are what we need. This frame has a leaf spring from the factory. That will not do. We need a different suspension set up. Choices
3 link with a panhard bar
triangulated 4 link
parallel 4 link
Now we could have purchased any of these to bolt jnto our frame. Not our style. We built our own polished stainless 3 link with custom fabricated panhard bar.
Now you need to pic an engine and transmission. There are many choices. Sky is the limit. We chose a small block chevrolet and a 2 speed powerglide transmission. Conversion kits are available for our chassis. They did not work with the body .....so we made motor mounts and radiator support from scratch
Brakes are next
We wanted a clean firewall so the stock s10 was out. That could have been used with the stock pedal assembly but we did not like it. Under tbe floor it went. We used a universal under floor mount master cylinder and power booster.
So now you have a plan for suspension and driveline.
Step 3: The look
Now pick the "look" you want. We went with a very classic custom look. Low and mean.
We started by chopping the roof 4"
The next step is to french in the headlights. This means to take out the stock buckets and "tunnel" the lights into the front fenders
Next we frenched in 1959 Cadillac taighlights.
Body and paint work are next on the list. We have not started that yet. I will post pics when we start the paint job.
Step 4: Conclusion
This is a quick overview of how to build a custom. There are many, many steps involved with building a vehicle this way. Please keep in mind this truck is all built by local youth. Most have never even touched a power tool before.
Here is the build sheet:
1947 chevrolet pick up, chopped 4"
1954 chevrolet pick up front sheet metal
frenched headlights and tailights
shaved door locks
1992 chevrolet S10 frame, frame boxed and shortened, full airride suspension including custom rear suspension components.
1978 Chevrolet Nova rear axle
1978 Chevrolet Nova 2 speed transmision
1982 small block chevrolet motor 350 cid ( 5.7 liter )
1967 Ford Falcon fuel cell
Corvette style master cylinder and power brake booster mounted under cab floor.
paint to follow.......it wil be a surprise!
If you have any questions please ask!!
Now get out and build something!!! Be safe and enjoy the shop!!!!