in this instructable i am going to make a cool toy car out of scrap wood and a old bike tire (only if you make your one wheels ) . kids love it , it takes you only a couple of hours , its a cool gift for cristmas and you can make endless variations .
so grab your scrap bin and make this project
and dont forget to vote on the wood contest ;D
Step 1: The body
Step 2: Dril some holes
drill with a 6mm drill bit the holes for the axis on the marked spot in the picture
and than drill with a 8mm drill bit the hole fore the ``neck of the driver`` you can make that by glue in a small peace of wood
Step 3: Making the head
take the scrap peace of wood from step one and make a cube out of it
than drill a 8 mm hole in it but only half througt than put in some decorative spikes for the eys
and glue the whole peace on to the body
Step 4: The axis and the wheels
you can cut the axes out of another peace of scrap wood i made them 4 cm long and 2mm thick
the wheels are made oud of 2cm by 2cm of wood . i roundet over the edges with a file and than cutted of 3 mm thick peaces
Step 5: Rubber around the wheels
for this part you need the inner tire of a bicycle and some all glue.
cut 3 peaces of tire of the same ticnes as the wheels , than make a cut in 2 of the rubbers and glue the first 2 peaces arount the wooden wheel .
put some extra glue on the third (uncut) peace of rubber an force it around the hole thing .this dont need any clamping pressure .
repead the proces 3 times and the weels are ready
Step 6: The last step :D
try finding the center of the wheels. this dont has to be purfect but the more center the more smoother the ride.
than drill a 3 mm hole in the center and put come glue in it . than put the axis true (picture 3 ) .
than put the wheel and axis throught the holes in the body of the car. put some glue on the and and put the other wheel on .
now you are done . and ready to make somebody happy