I made this mobile charger using 4mm MDF board. I already sealed and I was not able to disassemble and show you. I am going to explain how i did this...
Step 1: Materials and tools needed
4mm MDF board
12v 2amp transformer
4700 mfd 25v capacitor
car USB charger
wood nails (if needed)
Heat transfer paper
Step 2: The Design
This is the actual size what I made....(in inches)
Step 3: Circuit..
Step 4: Lettering
I made this lettering in paint shop pro and flipped it horizontal. Print the image on heat transfer paper i.e., flipped. Using Iron box transfer it to the MDF.
Note: Keep the iron box temperature to medium heat , if not you may burn MDF.
Step 5: Last step
Make the boarder as you wish so that it looks good...