Show All 10 Items
I created this spider in 123D Tinkercad. This spider is mainly based off of a tarantula. I did my research on google images. I made this spider mainly for the "Make it Real-ly Scary with 123D and Tinkercad Contest" but I also made it to use as a decoration and to scare people. Before 3D printing I recommend scaling it due to me not scaling it to realistic size. When 3D printing I recommend using using black especially if you plan on using it to scare some one. some places I recommend placing it when planning to scare some one are behind a shower curtan or behind towels or in the silverware drawer. epic_snaget-habbi.stl
Step 1: Legs.
Show All 9 Items
To create the legs I made a cylinder and than scaled it to size. After that I added spheres and grouped it (HINT: do not scale it after grouping with out holding shift or it will end out looking out something like the fourth picture. Now I put the segments on the proper angles and put them together. (do basically the same for the feelers)
Step 2: Body.
To do the backside I put a half sphere and a paraboloid together. For the front I shrunk a sphere
Step 3: Eyes.
To do the eyes I first made a sphere and put it in a formation. Then I highlighted the eyes and scaled it smaller. I then made the hight equal. I then put the eyes at an angle.
Step 4: Putting it all together.
The hardest part of putting it together is finding the right angles for the legs.