Do you ever get stuck in the car for very long, or go camping were there isn't any outputs? well all you need to make the Solar Power phone charger is a solar panel and a charger.
: 6 or 5 volt solar panel
: phone charger
: sodering rod
: hot glue
: electrical tape
Step 1: Stripping the wires
Now you need a cut off the USB ports from the charger and strip the wires. Then strip the wires from the solar panel is not stripped. Don't strip to small.
Step 2: Connecting the wires
All you need to do is connect the wires and test if you connected them correct. for some resion I had to connect red with black and black with red. Now just sober them together and then you can ether hot glue like I did of use liquid electrical tape. I put electrical tape after the hot glue so it looked better.
Step 3: Using
It might stop working sometimes because it doesn't have enough light. It might not show that its charging but it's still charging.