Shadow Sculpture

This is the first one of a short series that I am making.

Often I believe we constantly go around our lives looking at the world with the wrong light, maybe just the wrong perspective. I don't mean that we see thing negatively, I just think we often miss the beauty around us.

Step 1: Modeling

Shadow Sculpture
Shadow Sculpture
Shadow Sculpture
Shadow Sculpture
Shadow Sculpture
Shadow Sculpture

The first step is to come up with an image, it can be a picture, a drawing or as simple sketch, the simpler the better. In this case I was made this very simple sketch based on an image from the internet.

Once inventor is opened, just import the image you want to turn into a sculpture, it will be helpful to have it as a guide for later tracing your splines.

Make a new 3D sketch, it is important that it is 3D. Locking into a view, in this case the top view, start tracing spline curves over the selected lines of the image. Using the sweep command you can later give volume to the spline curve. Once satisfied with the results, you can turn the view to a perpendicular one (right-left or front-back) and start pushing and pulling the spline points. NOTE: constantly check that the sweep function is still true after you move a couple of points around. Also, keep going back to the original view (top) to check that the image is intact.

Step 2: 3D Print

Shadow Sculpture
Shadow Sculpture
Shadow Sculpture
Shadow Sculpture

Well, depending on you printing capabilities this might be different for each case, My little machine can make its own supports.

Step 3: Cleaning

Shadow Sculpture
Shadow Sculpture

Cleaning up was a pain, cutting the support material out was complicated and I broke the model more than once, nothing that some super glue and lots of patience can't fix.

Step 4: Showing off and selecting the right light

Shadow Sculpture

I have a lamp dedicated to this sculpture across the room, it is almost always off unless I want to see the shadow. The rest of the time the illumination of my room casts complicated shadows that hide the true nature and purpose of the sculpture. But my muse is just a switch away.

 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel