Necklace made of:
- nVidia GPU
Step 1: Shaping and drawing guiding lines
Shaping the GPU leaving a native board hole for the neck chain.
drawing the guiding lines for cutting the interior.
Step 2: Interior cutting
Drilled the corners by a diamond bit and cut the interior from hole to hole.
Step 3: Preparing for rotor mounting
Drilled holes and milled the channel for the rotor ax by diamond bit, under water for cooling the bit.
Step 4: Mounting the rotor
Keeping the rotor ax in place by two copper wires.
The rotor can be rotated.
Step 5: Fully assembled
Put the neck chain and a coating varnish on the back side of the GPU.