Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'

LED, buzzer , disconnection ..multi tester

Disconnection , LED, the buzzer can be checked .
The name of the tester , 'Jeolkameter Ver 2.0'.

'Jeolkameter VER 1.0' > Click

'Jeolkameter VER 1.1' > Click

Step 1:

Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'
1. The A block checks the disconnection .



• Switches are connected to 1 terminal.


2. The B block is checked the LED and buzzer .



• Switches are connected to the 2 terminals.
• The crocodile clip of the C block must be connected.


Step 2:

Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'
Multi tester  'Jeolkameter Ver 2.0'

  • Insert the pin into the Molex.
  • Use nippers cut the pin .
  • Insert the resistor .
  • Bend the ends of the resistor .

    Step 3:

    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'

    Using a glue gun.
    Attach the buzzer and switch in the battery holder.

    Step 4:

    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'

    Connect the wires to the switch .

    Step 5:

    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'

    Connect the remaining wire with crocodile clips .

    Step 6: The 'Jeolkameter' were completed.

    Multi tester  'Jeolkameter Ver 2.0'

    The 'Jeolkameter' were completed.

    Red LED : Just decoration for now marks the insert position of the LED.

    Step 7: How to use the 'Jeolkameter'. - Disconnection

    1. Disconnection

  • Place the slide switch in the direction of the arrow (left) .
  • After the "beep " sound normal , if the " silent " break
    Multi tester  'Jeolkameter Ver 2.0'
    ??.mp4(516x290) 19 KB

    Step 8: How to use the 'Jeolkameter'. - LED, Buzzer

    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Multi tester  'Jeolkameter Ver 2.0'
    Show All 8 Items
  • Place the slide switch in the direction of the arrow (to the right) .
  • The corcodile clips to connect with each other.
  • Plug the LED and the buzzer on the test port.
  • LED Test : (+) Is inserted into the " 3" hole . (-) is inserted into the " 4" hole .
  • Buzzer Test : (+) Is inserted into the " 1" hole . (-) is Inserted into the "2" hole.
    Multi tester  'Jeolkameter Ver 2.0'
    led.mp4(516x290) 19 KB
    Multi tester  'Jeolkameter Ver 2.0'
    ??.mp4(516x290) 20 KB
  •  
     

    Tag cloud

    make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel