This is a small project I made from a scrapbooking sticker and a 3/$1.00 electronic candle.
Step 1: Materials
These are the main items. The dollar store electronic candle and the scrapbook sticker.
Take off the mainbody of the candle. It has a battery, a switch, the special LED, and a silicon "Flame".
These are two scrap pieces of foamboard. First I cut out a hole to fit the bottom of the candle, then glued them both together.
Then I glued the bottom of the candle into the hole. The LED protrudes above the foamboard.
Then I cut a small hole just large enough to feed the LED through. After that I peeled the backing off the sticker and pressed it onto the foamboard.
After that I carefully bent the LED and put the silicon flame back onto the LED. Then I trimmed away the excess foamboard.