LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
Show All 7 Items
This project is a die that you will do with 7 LEDs, 8 resistors and a small switch. Once you construct the die, you will connect it to an Arduino hardware to download the program and you can utilize the die by manipulating a small switch.

Or you can use a Protoshield Kit for Arduino and assemble your LED die on it.

Copy and Paste the next websites to see the Video: http://www.youtube.com/watch?v=KTyM7S_y1ls
http://www.youtube.com/watch?v=37zNUG0LZi8


Step 1: Bill of Materials

LED Die with Arduino
LED Die with Arduino
1 Breadboard
7 LEDs
7 resistors of 200?
1 resistor of 1K?
1 Mini switch

Or

Use a Protoshield Kit for Arduino and the clear LEDs and the resistors you need to build your LED die.

Step 2: Install the LEDs and Resistors

LED Die with Arduino
LED Die with Arduino
Install the LEDs and resistors of 200? on the protoboard by observing the polarities of the LEDs. Remember that short terminal in a LED is the negative terminal that you will have to connect to the resistors of 200? by leaving free the other terminals to connect to your Arduino: Li to D7, L2 to D8, L3 to D9, L4 to D10, L5 to D11, L6 to D12 and L7 to D13. And the other terminals of the resistors connect to GND (blue line).

Step 3: Diagram of Project

LED Die with Arduino

Step 4: Continue with the Project

LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
Connect the rest of the components on the protoboard. That is, the preparation of the connections will use to connect to your Arduino later.

Step 5: Connect the Mini Switch

LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
Show All 7 Items
Connect the mini switch and do the necessary connections on your protoboard to wait only by your Arduino.

Step 6: Connect your Arduino

LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
LED Die with Arduino
Show All 8 Items
In this step,you will oonnect the arduino hardware to the protoboard and will install the program for this project that you will see in the following step the detailed program for managing the project.

Step 7: Program of the Project

LED Die with Arduino
LED Die with Arduino
With the following program, you will have concluded your project once you download it by utilizing Arduino environment and click on load; you will have running the program to utilize your project.

Program for the LED Die Circuit
//Arduino Code

/*LED DIE*/
//Select your led pins
int ledPins[7] = {7, 8, 9, 10, 11, 12, 13};
int dicePatterns[7][7] = {
{0, 0, 0, 0, 0, 0, 1}, // 1
{0, 0, 1, 1, 0, 0, 0}, // 2
{0, 0, 1, 1, 0, 0, 1}, // 3
{1, 0, 1, 1, 0, 1, 0}, // 4
{1, 0, 1, 1, 0, 1, 1}, // 5
{1, 1, 1, 1, 1, 1, 0}, // 6
{0, 0, 0, 0, 0, 0, 0} // BLANK
};
int switchPin = 5;
int blank = 6;
void setup()
{
for (int i = 0; i < 7; i++)
{
pinMode(ledPins[i], OUTPUT);
digitalWrite(ledPins[i], LOW);
}
randomSeed(analogRead(0));
}
void loop()
{
if (digitalRead(switchPin))
{
rollTheDice();
}
delay(100);
}
void rollTheDice()
{
int result = 0;
int lengthOfRoll = random(15, 25);
for (int i = 0; i < lengthOfRoll; i++)
{
result = random(0, 6); // result will be 0 to 5 not 1 to 6
show(result);
delay(50 + i * 10);
}
for (int j = 0; j < 3; j++)
{
show(blank);
delay(500);
show(result);
delay(500);
}
}
void show(int result)
{
for (int i = 0; i < 7; i++)
{
digitalWrite(ledPins[i], dicePatterns[result][i]);
}
}
 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel