In this instructable I will show you how to make your own 3D printed sailboat.
For this you'll need a 3D printer with filament and software for it.
ATTENTION: You will need supports to print this!!!
Disclaimer: I made this model, but I haven't printer it, it might not work!
This project is on https://tinkercad.com/ , and if you want you can modify it as you wish.
So, lets get started.
Step 1:First download the file(s) below (One of the files contains all the parts), then, If you have a Makerbot load them into ether ReplicatorG or MakerWare, If you have some other printer open its software and load the files. Resize the parts if you want and then print them.
After the print has finished remove the supports from the print, assemble the parts, add a sail and your 3D printed sailboat is finished. sailboat3.stl
sailboat3.stl7 KB sailboat2.stl
sailboat2.stl14 KB sailboat1.stl
sailboat1.stl138 KB sailboat.stl