EZ-EL Wire Michael Jackson Costume! Step-By-Step Tutorial
This project is a Michael Jackson Costume decorated with yellow EZ-EL wire. Perfect for Halloween or the next costume party you attend!

If you like tutorials like this, get more inspiration at http://www.ez-el.com/tutorials


Enter coupon code INSTmj at checkout for a discount!

Materials:

Michael Jackson Costume
Two 25' Yellow EL Wire Kits
Wire Stripper
Translucent Thread
Needle Pack
Dritz Safety Pins (Sizes 1 & 2)
Six 5" Black Zip Ties
X-Acto Knife

Step 1: Attach Inverter and Wire to Shoulder Pad

EZ-EL Wire Michael Jackson Costume! Step-By-Step Tutorial
For this project you are going to need two 25' Yellow EL Wire Kits, one for each side of the jacket. You're going to want to place the inverters under the shoulder pad because it keeps them out of sight. Just clip them to the wire on the inside of the shoulder. Following my design, I created four Xs on the shoulder pad. I used 11 zip ties to keep the wires in a specific shape, and I used safety pins to temporarily attach the wire onto the suit.

However, feel free to take creative license in terms of what type of Michael Jackson costume you use, and what designs you make with the EL Wire.

Step 2: Attach Wire to the Costume Chest

EZ-EL Wire Michael Jackson Costume! Step-By-Step Tutorial
Work your way down from the shoulders to the chest, using safety pins and zip ties to hold your designs in place. Now would be a good time to make sure all of your designs are neatly and correctly done. Don't sew anything in place just yet, just apply safety pins like I mentioned earlier and make sure your plan is satisfactory.

Step 3: Sew the EL Wire onto the Costume

EZ-EL Wire Michael Jackson Costume! Step-By-Step Tutorial
This step is where your designs become permanent. Cut holes throughout the costume with the X-Acto Knife, weaving the EL-wire through those holes. When this is done, sew the wire into the costume with the translucent thread. Something to keep in mind is that your stitch work doesn't necessarily need to be flawless, but ensure that it gets the job done. Remember, this costume is intended for a dark setting!

Step 4: Enjoy!

EZ-EL Wire Michael Jackson Costume! Step-By-Step Tutorial
Enjoy your finished project! Impress your friends at the next costume party!

If you like tutorials like this, get more inspiration athttp://www.ez-el.com/tutorials

Enter coupon code INSTmj at checkout for a discount!
 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel