in this instructable i am going to make a 3d doodle with a hot glue gun and a freezing cold plate .
it is not yet perfect and i am working on a way to make the stuff they have in 3d printers in a form you can put in your hot glue gun. (so you don`t need the freezing cold plate ) and of course is the plastic much stronger .IF SOMEBODY GOT SUGGESTIONS PLEAS LEAVE THEM IN THE COMMENTS
this is much cheaper than buying a 3d pen witch cost 100-150 euro`s . because it is made from glue it cant`t snap and it is simple to repair to
Step 1: What you will need for this project
the needs for this project are :
this is for a small baking plate , i used a big one so i doubled it up.
Step 2: Making the freezing plate
to make the freezing plate i used the flowing simple steps
Step 3: Make something
you can make simple patterns with painter`s tape . i taped
I made 1 mistake in my processes , because i putted the hot glue strait on the plate , the result of this was that i had some ugly peaces of black paint on the 3d model , the simlest way of solving this is to tape the hole plate . this allows you to sketch your design on the tape to.