Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)

Actually, this project based on another project I have build before. Yet, Instead of building the robotic arm and using Arduino, I used my friend 6DOF robotic arm and Intel Galileo.

Step 1: Components

Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)
Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)
Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)

1- Intel Galileo Gen 2

2- 1Sheeld

3- 6 DOF Robotic Arm.

4- Android Smart phone.

Step 2: Arduino Sketch and Mobile Application

Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)
Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)

First, we have to download the 1Sheeld application from Play Store.

Then, download the 1Sheeld library and place it in the Arduino libraries directory. If, It is your first time to deal with 1Sheeld, you should see this getting started tutorial at first.

You will find the code below, it is so easy. Actually, the code simply gets the values of the oreinataion sensor from the mobile for the 3 directions (x,y,z) and map then on the servos and use the proximity sensor to open and close the gripper.

#include
#include Servo myservo1; Servo myservo2; Servo myservo5; Servo myservo6; void setup() { OneSheeld.begin(); myservo1.attach(3); myservo1.write(0); myservo2.attach(5); myservo2.write(0); myservo5.attach(10); myservo5.write(70); myservo6.attach(11); myservo6.write(10); analogWrite(6, 200); analogWrite(9, 200); } void loop() { if (ProximitySensor.getValue() > 0) myservo6.write(10); else myservo6.write(120); if(OrientationSensor.getX() > 0 && OrientationSensor.getX() 0 && abs(OrientationSensor.getZ())

Step 3: Test

Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)
Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)
Control robotic arm with gloves, Android Phone and Intel Galileo (Updated)

After uploading the code on Intel Galileo and installing the mobile applications. Open the mobile application and scan for 1Sheeld via bluetooth and connect to the shield.

Choose the orientation and proximity shields, and then test.

 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel