I love chiptunes and so I had to have more. If you have read my Chiptunes Project you will know what I mean.
Thank you to Drew Crawford for an awesome tune.
I will also teach you how to install an Arduino Library Code.
Step 1: Parts.
You will need: 3 1K resistors
1 Arduino Uno
1-3 Piezos/ Speakers
1 Audio Output Jack.
* I decided to make a shield but you don't have to. *
Step 2: Program and Install a Library
Show All 13 Items
Take your Arduino and connect it to the computer.
Step 3: Build.
Follow the Fritzing schematic to build. The resistors should be 1k but they sadly are not. Fritzing does not have 1k resistors.
The 1k resistors are used to mix the output on one speaker. Otherwise, you could have three speakers/piezos.
I decided on a shield but that's optional.
Step 4: Listen.
When you power the Arduino up it should start playing.
Hope you liked this ible and leave a comment if you have questions or, comments. :-)