Throughout this Instructable I will show you how to make a fishing lure out of paracord. When in a survival situation knowing how to take apart your paracord gear and use it for survival is important. After all, why else would you wear paracord gear if you don't know how to use it in a survival situation!
You can find more tutorials on my personal website here: ParaVival
Step 1: What You'll Need
Step 2: Pulling Guts Out and Cutting to Length
The numbers below correspond with the numbers in the diagram.
Step 3: Adjusting the Guts
Now pull the guts of the paracord out from the bottom about an 1/8-1/4 of an inch.
Step 4: Slipping Hook Into Paracord
Slip the hook through the sheath of the paracord like shown in the diagram.
Step 5: Melting the end
Melt the end of your paracord AND inner strands (guts).
I like to melt the sheath first, to close in the guts, then melt the guts.
Make sure the eye hook at the end of the hook is exposed. Don't melt the paracord over it.
Remember, the guts must be melted to the sheath so they don't get ripped out. There is nothing else holding them in.
Step 6: Frilling the ends.
Now just frill the end of the sheath, and the guts so they look like they do in the diagram and you're done!
Find more cool tutorials and other stuff on my personal website here: ParaVival.com/How-tos