I made a Wallet case out of leather.
Leather material gives it a more luxurious feel.
Step 1: Prepare the Template
Prepare the template that is larger than the actual size of a card.
Step 2: Apply the Oil
Apply the oil to the back side of the leather.
Make sure you apply a heavy coat of oil.
Step 3: Needed to Complete Project
These are all the materials you will need to complete the project.
Step 4: Polish the Leather Edge
Apply oil to the leather edge and polish it with the stick of the wood.
Step 5: Draw a line to show the sewing line
At this time, draw a line about 0.1 inch away the sewing line from the edge.
Step 6: Draw the seam line for the wallet and pierce it with a hammer
At this time, draw a line on the wallet to make the sewing line.
Pierce it with a hammer on the sewing line.
Step 7: Sew it
Sew it with the wax cord.
Step 8: The Inside pockets are attached
There is an inside pocket on the right and left side.
Step 9: Oh My God!
I failed....I was not able to finish that I made a wallet.
Because holes were out of position, a needle was not able to go through holes.
It was difficult to pierce it exactly.
I reflect upon that, and use it for next time!!
I will reuse these materials and I will make something.
I am sorry not to be completed!
Thank you for watching!!