How to Make a Penholder
Make the penholder with the use of leather.
Step 1: Prepare the Leather
Prepare the slender leather.
Step 2: Cut out the Leather
Cut out the leather with a leather cutter.Be careful not to cut your fingers!
Step 3: Polish the Leather Edge
Apply oil to the leather edge and polish it with the stick of the wood.
Step 4: Prepare a Model of the Oval
Prepare a model of the oval.
Step 5: Wind the Slender Leather
Wind the slender leather around the model of the oval.
Step 6: Glue the Leather
Glue the leather together using elastomeric adhesive which is used to glue leather.
Step 7: Draw the seam line for the Leather
Draw a line to show the sewing line.At this time, draw a line about 0.1 inch away the sewing line from the edge.
Step 8: Pierce it with a Hammer
Pierce it with a hammer on the sewing line.
Step 9: Prepare the Leather of the Circle
Step 10: Sew it with a Thread
Sew it with a thread. Use the thread which I pulled with solder.
Step 11: Sew it
After the glue has dried, sew it with the wax cord.
Step 12: Make a Hole
Make a hole to put a pen.
Step 13: Sew together
Sew together Ring-Leather with the pedestal.
Step 14: You are finished!
You have completed your project.