How To Make A Death Star Christmas Ornament
How To Make A Death Star Christmas Ornament
How To Make A Death Star Christmas Ornament
How To Make A Death Star Christmas Ornament
How To Make A Death Star Christmas Ornament
How To Make A Death Star Christmas Ornament


Star Wars is a perfect childhood fantasy complete light sabers, robots, blasters and Jedi mind tricks!

This ornament is made from 4 - 3/4 blocks of maple and hollowed in two halves. This was my first time making a hollow ornament but splitting in half wasn't the first attempt.

I first tried making it by hollowing it out from the end with a sharpened allen wrench. I worked OK but was much too slow, for me, and I kept hitting the opening and widening the hole.

One thing I couldn't have was for the hole at the top to widen or the light wouldn't fit snuggly. It measured 5/16 for my light set. I'm not sure if that is universal or not. I would check before drilling.

After I hollowed out the two sides, I glued them back together and turned the ornament round. Round-ish. It's not important, or rather, it's not important to me!

Next was to use the jamb chuck to allow me to dish out the planet cannon portion of the battle station. The crux of the Death Star. I then took out my Dremel and cut a bunch of metal plates impressions into it. I think it worked for what I was looking for.

The last step was drilling out some holes for the light to shine in. I believe the bit I used was 1/8. Then simply paint and add whatever highlights you want! It's ready to hang on your tree. Or not.

I'm really not sure if it's smart to hang a wooden ornament with a light stuck in it on my Christmas tree. I'm sure something will tell me....

 
 

Tag cloud

make build easy simple arduino making homemade solar laser printed portable cheap mini building custom cardboard wooden create super lego turn paracord chocolate your paper light intel